Drop Ceiling Troubleshooting eHow

Drop Ceiling Troubleshooting eHow

Sagging or Bending

There are two types of drop ceiling tiles, long ceiling boards and smaller grid supported tiles. Ceiling boards are those found in mobile homes that are prone to sagging. Excessive moisture, resulting from a leaky roof or excessive humidity in bathrooms or basements can cause these ceiling boards to bow or bend under its weight. Unlike the newer styles supported individually on a grid system, ceiling boards are secured in place by gluing or nailing the tiles directly to the existing ceiling or furring strips. The only solution to repair these old tiles is to find a way to reform them while returning them to their original position. If the board is only slightly bowed, you may be lucky and try this simple remedy first. Using a spray bottle, lightly mist the tile until it is damp, and then force it back into its original position. Prop the board up with a 2-by-4 piece of wood until it has dried. If the damage was minor, the board should return to its original shape and position nicely. However, if the damage was extensive and you are unable to find a matching piece for replacement, there is another alternative to conceal the bowing boards. For this method, you will need a piece of 2-by-4 the length of the seam on the ceiling. Return the tile to its original position, place the wood over the seam of the tiles, and secure it in place with nails or screws. You may want to add more beams to cover the seams to create a unified cathedral style appearance within the room.

Replacing Damaged Tile

Chips and cracks throughout the drop ceiling tiles are a result of poor installation, shoddy removal and maintenance or careless home ownership. For homes with ceiling boards, you can try to fill any holes or small cracks with drywall putty and then perhaps prime and paint the tiles out with latex paint. For homes featuring the more common grid system, purchase a replacement tile from your local home improvement store, remove the old tile and insert the new one. You may need to use a sharp utility knife to shear off sides that do not conform to the opening well. A utility knife comes in handy for tile that no longer fit or need shaping to conform around corners or other tiles within the grid. You may have to use this tool when you have tile that do not lay flat or crooked therefore exposing seams.

More Like This

You May Also Like

Lighter, less expensive and less time consuming to install than drywall, drop ceilings can be installed in any room to add noise-dampening.

Most tile ceilings today are made with acoustical tile. This is a positive development, because acoustical tiles are very easy to repair.

The suspended ceiling method uses ceiling tiles hung from a grid called furring. The furring supports the tiles and keeps them from.

Ceiling fans can help you save energy the whole year through if they're used properly. This means not only employing ceiling fans.

Ceilings can be made of several materials and should be both decorative and functional. Wood brings a warmth and a charm to.

Leaky toilets, bathtubs and sinks on upper levels often time result in water damaged ceilings that sag. As long as the drywall.

Drop ceilings consist of suspended rails that hold up ceiling tiles to create a lower ceiling. Drop ceilings can be useful for.

In the middle of the ceiling hold a piece of tile up on the ceiling with the edge of the tile against.

When you repair cracks, stain damage and other ceiling problems on a textured ceiling, you need to match the ceiling texture as.

Drop ceiling tiles, also known as acoustical tiles, are made of a composite material. The standard sizes for acoustical ceiling tiles are.


Leave a Reply