Types of Insulation for Metal or Steel Buildings BuildingsGuide

Types of Insulation for Metal or Steel Buildings BuildingsGuide

Insulation Options For Metal or Steel Buildings

Metal and steel buildings may be durable, but this choice of construction materials also presents a challenge when looking for insulation to use on such buildings. Choosing the right insulation for a metal building kit helps to reduce energy consumption and, in some states, allow those constructing the building to claim tax incentives for making the effort to save energy. Steel and metal panels alone offer no protection from the outside temperature, meaning there is no natural barrier to heat and cold. Adding the right type of insulation helps to control the conduction of outside temperatures. The result will be a building that stays cooler in warmer months and warmer once the temperature drops. There are four basic types of insulation, all of which can have their place in a metal or steel buildings.

Loose-fill Insulation

This type of insulation consists of loose fibers or fiber pellets. These fibers are blown into building cavities with special equipment. Loose-fill insulation can be more expensive, but does fill corners better and reduces air leakage. Additionally, this type of insulation provides a better sound barrier. Cellulose fiber is made from recycled newspapers that have been chemically treated to be flame retardant and resistant to moisture. This is a good option when looking to take advantage of green construction perks. Loose fill insulation is generally used in walls, attics and floors where it is applied through a moist-spray technique or a dry-pack process. Rock wool or fiberglass provides fuller coverage that is better for steel or metal buildings where it is applied using a Blow-in-Blanket system that blows the insulation into open stud cavities. Loose-fill insulation has a R-3 to R-4 value per inch. Cellulose fiber increases the insulating value by 30 percent over rock wool or other materials.

Batt and Blanket Insulation

Rigid Board Insulation

This type of insulation is usually made from polyurethane, fiberglass or polystyrene. It can be cut to the desired thickness, increasing the insulating value from R-4 to R-8 per inch. Rigid board insulation is best for reproofing on flat roofs. It is also good for use on basement walls or as perimeter insulation in cathedral ceilings. It can also be used on concrete slab edges. This insulation needs to be covered with 1/2-inch gypsum board or other flame-retardant materials when applied to interior spaces. Weather-proof facing is required for exterior applications. Local municipalities may require additional covering.

Spray Foam Insulation

This type of insulation is liquid and contains a foaming agent and a polymer such as polyurethane. The liquid mixture is sprayed into walls, floors and ceilings. Spray foam insulation expands as it is applied and turns into a solid cellular plastic consisting of air-filled cells. This type of insulation is good for steel and metal buildings because it fills every space, no matter how small. This type of insulation is ideal for usually shaped designs or getting around obstructions. Spray foam insulation is more expensive than batt insulation, but provides a better air barrier. This is a major plus for metal and steel buildings. Additionally, spray foam insulation does not require caulking and other additional barriers since it is already airtight.

Protection from Condensation

Condensation is a major concern in metal and steel buildings. Insulation serves to protect a metal building from condensation, which can cause damage over time. Insulation creates a vapor barrier to reduce how much condensation takes place directly on the steel panels. Another issues with a steel or metal building is humidity. A concrete foundation that is not fully cured can be a contributing factor to increased humidity and condensation. Steel or metal buildings located in colder climates can experience condensation from exposure to ice and frost. A regular pattern of freezing and thawing can cause frost to melt, drip water and produce condensation. Insulation placed around the red iron before metal sheeting is installed creates a «thermal break» between outside sheeting and internal framing to prevent condensation.

Protection from Mold

Insulation that is not properly installed may trap mold within the walls of a steel building. Improper maintenance is another common cause of mold in steel buildings. Animals and birds may damage insulation in metal buildings as they try to create a home. It is not always possible to prevent every possible cause of mold. The best defense is to be aware of what is going on inside the walls of a building. This is accomplished with regular inspections using special equipment to detect possible insulation issues. Once an issue is inspected, the area in question needs to be opened to correct the issue. This may include replacing insulation that is damaged.

Fiberglass and Insulation Materials

Fiberglass is usually the material of choice for insulation used in steel and metal buildings. Black or white vinyl fencing laminated on one side is usually a feature of the insulation to prevent moisture. White facing is sometimes used to counter the impact of ambient light by reflecting it away from the surface of the building. Any of the four basic types of insulation may be used in metal and steel buildings. The choice of materials used depends on several factors, such as where the building is located and how the overall structure is designed. Most metal buildings use different types of insulation for different parts of a building. If properly installed and maintained, a steel or metal building can be highly durable, energy-efficient and well-insulated for many years.

For further information on insulation see our article here

Leave a Reply