Plasterboard ceiling with his hand to make a plasterboard…

Plasterboard ceiling with his hand to make a plasterboard...

constructionrepair.net

div How to make a plasterboard ceiling. Suspended plasterboard ceilings. How to repair their own hands.»>

Plasterboard ceiling with his hands. How to make a plasterboard ceiling. Suspended plasterboard ceilings.

Ceiling gypsum board is very popular not only as a universal way to align the ceiling, but also thanks to the vast possibilities of creating a unique interior environment. But suspended plasterboard ceilings require significant investment mainly to pay the workers, and there is a question as to the ceiling of plasterboard with their hands.

The device is made of plasterboard ceiling without any problems can be done with his own hands, even though the process of creating a ceiling of plasterboard rather laborious. The following stages of work on the creation of the ceiling drywall.

Design ceiling of plasterboard.

Framework for the ceiling of plasterboard.

Mount to the ceiling drywall.

Plaster ceiling of plasterboard.

Painting the ceiling of plasterboard or Wallpapering.

Now consider all the steps one by one. I will try to do that is to get instruction on how to make a plasterboard ceiling with his hands. Since most interest tiered suspended plasterboard ceilings, all stages by the example of a two-tiered ceiling.

For clarity, we will use the pictures of the drywall ceiling previously published in the Photo Gallery.

The design and construction of the ceiling drywall.

Design ceiling of plasterboard.

As previously mentioned, the most interesting are layered or more correctly duplex suspended ceilings of plasterboard. Due to the fact that on the one hand, they did not greatly reduce the level of the ceiling (up to 10-15cm) with another very attractive in terms of interior design, with the ability to create additional illumination. Design ceiling of plasterboard can be any, at the discretion of the customer. They are united by box of drywall on the ceiling around the perimeter or part of the premises.

From the point of view of design box with built-in lights around the perimeter of the room is designed to provide an additional decorative lighting. This solution is often used in the hall. Local second level, tend to make for highlighting specific areas. Example, the light in the kitchen countertops.

Box of drywall on the ceiling can be straight or curved. By and large, it does not change much technology to create ceiling of plasterboard.

The design of the ceiling drywall.

Under construction of plasterboard ceiling should understand the design of the framework. Indeed, depending on the design of the ceiling frame will be different. It is true in the first place on the second level.

The first level in the majority of cases remains the same because it is a plane.

Thus, the ceiling of plasterboard has the following structure. The first level is actually a plane. Flat frame consists of straight rails, consisting of longitudinal and transverse ceiling and wall profiles.

Wall profile located around the perimeter of the room. Longitudinal ceiling is parallel to the ceiling space along with a step of 60 cm perpendicular to the length of the transverse profile with a 60 cm Thus, a first level.

The second level is a box of drywall on the ceiling. The box is a structure on the one hand fastened to the wall on the other to the frame of the first level. All the sides of the box are bonded together by transverse rails.

Here is a brief of the drywall ceiling design. Basic dimensions: the indentation of the first level from the base of the ceiling of about 7 cm, height of the box (the second level) of about 10cm. Other sizes depend on the design space.

Framework for the ceiling of plasterboard. Instruction.

This procedure is detailed in the paper Mounting frame for plasterboard. In this article, I will describe briefly a procedure.

Frame mounted to the ceiling of the first level of the drywall. To do this:

Wall profile is set at a distance of 5 10 cm from the base of the ceiling. It depends on the roughness of the ceiling and the necessary amount of space for wiring and fixtures, etc. In order to be exactly set the guide profile is best used laser level.

With the help of pre-made layout and then attach the profile.

Establish a longitudinal profile of the distance of 60 cm if the length of the profile is not enough, the profile of matched using a special profile element.

To the base of the ceiling above the ceiling profiles are fixed suspensions. Attach hangers can either anchor nails, or using special anchors. Next to these are attached with screws hanger rails.

The next stage of the cross rails. They are perpendicular to the longitudinal profile at a distance of 40 60 cm Connection longitudinal and transverse profiles implemented by means of a special element crab.

Not so clever way to create the framework for the ceiling of the first level of the drywall. It should be noted that in the place where the first level will be interfaced with the second should provide additional profile. Otherwise there is nothing to attach box of drywall on the ceiling.

Next box mounted on the ceiling of plasterboard.

The process of creating the box is similar to creating the first level. The only difference is that the reference surface is the wall and the frame of the first level, and not a wall and the base of the ceiling.

Mount to the ceiling drywall.

Prior to this work, all communication (for lighting, track cassette air conditioners, etc.) must be installed. Plaster ceiling paneling starts at the first level. Fixing plasterboard to the ceiling with screws exercise. If the ceiling of plasterboard duplex, the space on the second level you can not close.

After the first level of protection is performed covering the second level. In principle its simple enough, but there are several important features.

Mount to the ceiling drywall screws do, with screw head should be recessed into the body of the paper. It is necessary that in the future it will not interfere with putty. Strongly utaplivat screw so we can not drywall material is very fragile and can crumble. You can give advice.

Since the plaster ceiling paneling is performed using the screwdriver (without it is very difficult to do), then it can be pre-set torque, which does not allow much sink screw.

Mount to the ceiling drywall is made with a small gap between them. It is necessary, that would be better kept putty. On the whole sheet of drywall is a special slot (is on the edge of the sheet), intended for gluing serpyanku and subsequent fillings. On scraps or whole leaves the slot naturally absent, so the edge of the sheet to make a chamfer.

Plasterboard ceiling with his hand to make a plasterboard...

Again, that would be better to keep the putty.

Fasten sheets of drywall to the ceiling hard enough. And almost impossible to do alone. Therefore, its best to do it together.

It should be noted that the assistant must be a fragile girl, and a strong man.

Plaster ceiling of plasterboard.

Plaster ceiling plasterboard takes no less time and effort than the previous work. Gypsum plaster is done in three stages. First shpaklyuyut joints, pre-taped and serpyanku head screws. The second step is to label the baseboards.

The third is the main ceiling plaster.

Plaster ceiling gypsum board in the following order.

On joints while sticking serpyanku shpaklyuem seams. At the same time carefully shpaklyuem screws. The meaning of this stage in the preliminary alignment.

Ie to close the joints and even depression of screws.

Without waiting for the plaster to dry you can stick the plinth.

After drying, it should be putty sanding. This is done to remove a roughness of the first stage of putty. For sanding best applied Grinding machine.

And sandpaper grit 120 150. Of course, you can use hand tools, but it will greatly increase the complexity and time.

The last step is the final putty and sanding. For these works, use a spatula medium size. The main objective of a uniform layer of plaster applied to the entire surface of the ceiling.

After drying zashkurivayut ceiling in order to remove excess putty irregularities and flaws.

Painting the ceiling of plasterboard or Wallpapering.

There are three options for finishing the ceiling plasterboard painting, Wallpapering, or a combination thereof. Wallpapering is a traditional way. One thing to note is desirable ceiling primed.

Handling multiple primer facilitate the process.

Painting the ceiling plasterboard has great features. First, the painting can be performed directly on the plastered walls, and the pre-papered ceiling vinyl. If pre okleit ceiling vinyl, go to the paint more evenly and of the ceiling a bit better, but to say that the difference is not radical.

In my opinion, a preliminary pasting vinyl advisable to carry out the low ceilings and the use of dark shades of paint. The white ceiling practically no difference.

Second, if the painting of the ceiling drywall is done directly on the plastered walls, you need to paint in several layers. It should always wait for the complete drying of the first layer. The fact that the painting is not treated soil surface layer of plaster ceiling opens and may accumulate on the roller, which in turn will lead to a ceiling vyscherblin and hillocks.

Thats principle and how to make all of the drywall ceiling with his hands. Good luck!


Leave a Reply