Ceiling Speakers Installation

Ceiling Speakers Installation

Ceiling Speakers Installation

Ceiling speakers installation is an easy process once you have the essential technical knowledge. After reading this article you will definitely understand how to install ceiling speakers yourself at your home.

If you buy good quality speakers and install them in a proper manner, you can get a great sound effect in the room, where it is installed. For a successful ceiling speaker installation, you will need a speaker, speaker harnesses and speaker wires. You should be very clear about the way you will be using the ceiling speakers and the place where they should be installed, based on the use before you actually start off with the installation process. Proper positioning of the speakers is also important at those times, when you are planning to replace your current sound system with the ceiling speakers. It is important to consider factors such as space available in the room, cost of speakers, repairing required for speakers and sound quality before the installation of ceiling speakers.

Installing Ceiling Speakers

Installing ceiling speakers will be easy, if you follow the following suggestions. Now that you are very sure about your requirements, you can start the actual installation process. The first thing to take care of, is that your speakers should be situated at an even distance around the room. Take a pencil in your hand and mark the exact locations of the ceiling speakers with it.

In case you think that you need to change the location of a speaker, then you should ensure that the adjustments for the other speakers are correct and that there is no uneven dispersion of sound from the speakers, once they are installed completely. There is a thing known as a stud finder, which will enable you to find that you will not face any obstruction from any joints when you start cutting the ceiling for the installation. Installing the ceiling speakers directly and perfectly into the joints, which are already available, is the best suggestion for people who wish to know how to install ceiling speakers. You can consider the idea of filling the region where you cut speaker holes with R-11 insulation, if it does not have insulation to improve the sound quality of your speakers.

Ceiling Speakers Installation

You should have a cutting template at the center of the ceiling speaker and you are supposed to use a drilling machine to make a small hole in the center of the outline. While doing the drilling work, please note that you should not come across any sort of obstruction. While doing this work, you are advised to wear goggles which will protect your eyes from certain substances and materials. The coat hanger which you have, must be bent from the end of it up to a distance of around five to six inches in a right angle and the tip should be inserted into the hole, which you have already drilled. Once you reach the right angled bend, stop inserting the tip into the drilled hole and check out for some obstructions (if any). If you conclude that there are no obstructions, then you can use your drywall saw and cut an outline after you remove the hanger.

The speaker wire can run through your ceiling or from the basement. You can also connect the wire along the inside of your wall to your speaker by running it first through the space, below the drywall. This can be done only when the baseboard is removed. The fish tape is vital in the installation of ceiling speakers because it is useful in pulling the hole to the location of the receiver. After completing the process, you are supposed to hide the wires by replacing the baseboard. If the wire which you are using is thick you will get a very good sound quality once you are done with the ceiling speakers installation. Talking about the length of the wire to be used, it will be convenient and appropriate to use a eighteen gauge wire for running it for less than fifty feet and a sixteen gauge wire for running it in between fifty and hundred feet.

While the wire connections are in progress you will have to make sure that the wiring polarity of the receivers and the speakers is exactly the same. I hope that have easily understood how to install ceiling speakers after reading this article.


Leave a Reply