How to Paint a Chevron Wall — Project Nursery

How to Paint a Chevron Wall - Project Nursery

DIY: How to Paint a Chevron Wall

by Caden Lane | April 11th, 2012

Im so excited to share this project of how to paint a chevron wall. In case you didnt know, its official—baby #3 for us is another GIRL! And although shes not due until the end of August, Im getting a head start on her nursery now. Okay, technically, my official due date is September 5th, but since I will be having another C-section, this OCD mama will be scheduling the babys arrival at the end of August.

The furniture is ordered, the bedding is picked and the paint colors are set! Ill be sharing the design process as it unfolds, but I wanted to first give you an inside peek at the chevron walls I painted this past weekend. I cant stop staring at them!

If you are planning a zigzag accent wall or even looking to update another room in the house (I think chevron would be cool in the kitchen), heres my step-by-step process of how to paint a chevron wall in one day!

1. First, assemble your tools. I used a yardstick, pencil, blue painting tape (2 rolls), a level and a ladder. Our ceilings are 9 in the nursery, but if you have lower ceilings, you might be able to get away with a step stool.

2. Decide how big you want your chevron to be. (And how much taping off you want to tackle!) I wanted it to be big and bold, and since I didnt have to paint the wall behind the chevron, I wanted the stripes to be equal thickness. I recommend starting at the top; that way the points are all even along your ceiling, and if it gets crooked as you go, its almost like an optical illusion—no one will ever know! I started the tape in the top left corner, I eyeballed the angle I wanted the chevron, and the distance I wanted it to stretch. Holding the tape at either end, I placed it on the wall and used that as my guide for measuring.

2. Keep it straight and even! To keep all the angles the same, I measured from the corner of the wall to the top of the first point and then doubled that measurement to mark where the second tape (going down) would hit. I continued the same measuring points method the entire way across the wall, giving me equal distance from one to another. I came short at the very end (you can see where it starts a new zig or zag on the right side), but I actually like how it turned out not so perfect!

3. Connect the Dots. Once I had the top row complete, the rest were so much more simple! From each point, I measured 8 down and marked the wall with pencil. You can use your level alongside your yardstick to make sure your lines are straight, and then its like connecting the dots with your tape!

4. Keep the corners sharp! Dont forget to fold the corners of the tape at the points to give it a seamless look.

5. Roll on the paint.  Once the entire wall was taped off, I took a small roller brush and painted on the color. When painting with tape, try not to put as much paint on the roller. You dont want it sneaking under the tape, and it takes less time to apply two coats of light paint then to go back after you take the tape off and make straight lines on the entire wall (a lesson I learned painting stripes in my sons room).

6. The reveal!  Here comes the fun part—as soon as the paint dries, slowly pull the tape off. If there are any parts where the paint did sneak through, just take a small craft brush and smooth out the lines by hand.

So there it is! My daughters peachy-pink chevron walls. I think it turned out pretty fabulous, and for the three other walls, I used a light shade of teal. I cant wait to see how this nursery evolves.

Now, if the next twenty weeks of pregnancy can go by as quickly and easily as this wall was to paint!

DIY: How to Paint a Chevron Wall

by Caden Lane | April 11th, 2012

Im so excited to share this project of how to paint a chevron wall. In case you didnt know, its official—baby #3 for us is another GIRL! And although shes not due until the end of August, Im getting a head start on her nursery now. Okay, technically, my official due date is September 5th, but since I will be having another C-section, this OCD mama will be scheduling the babys arrival at the end of August.

The furniture is ordered, the bedding is picked and the paint colors are set! Ill be sharing the design process as it unfolds, but I wanted to first give you an inside peek at the chevron walls I painted this past weekend. I cant stop staring at them!

If you are planning a zigzag accent wall or even looking to update another room in the house (I think chevron would be cool in the kitchen), heres my step-by-step process of how to paint a chevron wall in one day!

How to Paint a Chevron Wall - Project Nursery

1. First, assemble your tools. I used a yardstick, pencil, blue painting tape (2 rolls), a level and a ladder. Our ceilings are 9 in the nursery, but if you have lower ceilings, you might be able to get away with a step stool.

2. Decide how big you want your chevron to be. (And how much taping off you want to tackle!) I wanted it to be big and bold, and since I didnt have to paint the wall behind the chevron, I wanted the stripes to be equal thickness. I recommend starting at the top; that way the points are all even along your ceiling, and if it gets crooked as you go, its almost like an optical illusion—no one will ever know! I started the tape in the top left corner, I eyeballed the angle I wanted the chevron, and the distance I wanted it to stretch. Holding the tape at either end, I placed it on the wall and used that as my guide for measuring.

2. Keep it straight and even! To keep all the angles the same, I measured from the corner of the wall to the top of the first point and then doubled that measurement to mark where the second tape (going down) would hit. I continued the same measuring points method the entire way across the wall, giving me equal distance from one to another. I came short at the very end (you can see where it starts a new zig or zag on the right side), but I actually like how it turned out not so perfect!

3. Connect the Dots. Once I had the top row complete, the rest were so much more simple! From each point, I measured 8 down and marked the wall with pencil. You can use your level alongside your yardstick to make sure your lines are straight, and then its like connecting the dots with your tape!

4. Keep the corners sharp! Dont forget to fold the corners of the tape at the points to give it a seamless look.

5. Roll on the paint.  Once the entire wall was taped off, I took a small roller brush and painted on the color. When painting with tape, try not to put as much paint on the roller. You dont want it sneaking under the tape, and it takes less time to apply two coats of light paint then to go back after you take the tape off and make straight lines on the entire wall (a lesson I learned painting stripes in my sons room).

6. The reveal!  Here comes the fun part—as soon as the paint dries, slowly pull the tape off. If there are any parts where the paint did sneak through, just take a small craft brush and smooth out the lines by hand.

So there it is! My daughters peachy-pink chevron walls. I think it turned out pretty fabulous, and for the three other walls, I used a light shade of teal. I cant wait to see how this nursery evolves.

Now, if the next twenty weeks of pregnancy can go by as quickly and easily as this wall was to paint!


Leave a Reply