Preparing Walls and Ceilings for Painting How to Get the Best Finish When Painting Walls and

Preparing Walls and Ceilings for Painting How to Get the Best Finish When Painting Walls and

Preparing Walls and Ceilings for Painting — How to Get a Great Quality Paint Finish on Ceilings and Walls

If youre planning to redecorate by repainting a wall, there are a few things which can make the job look really professional.

Before You Start Painting Walls or Ceilings

Get the room ready by removing as much furniture as possible from the room. Any that you cant remove, move to the centre of the room and cover with dustsheets.

Next you need to protect the floor put down dustsheets. You can buy disposable dustsheets made from thin plastic if you dont have any old material you can use. It is also a good idea to stick these sheets down if possible as they are all too easy to trip over.

Check the manufacturers directions for use before applying your tape to ensure that it will not damage your carpet or the surface you are sticking it to.

Remove any lampshades from walls or ceilings youre planning on painting. If possible, remove the lamp fittings too. If you want to be really thorough, you could take radiators off the wall too. See our Removing a Radiator Project for help with this. If removing radiators is too big a job for you, you can use a small roller to get down behind the radiator when youre painting.

Preparing for Painting Walls and Ceilings

Wash Down With Sugar Soap

If the walls and ceiling are in a good state and you just want to change the colour or freshen it up, you can just wash them down with a sugar soap and water solution. This will remove any dust and grease, and help the new coat of paint to adhere to the wall. Make sure the walls and ceiling dry out completely before you start painting.

Fill any Cracks in Walls

If there are any cracks in the walls, these should be filled. Cracks often appear over time in corners and around windows, and sometimes between the wall and the skirting, so be sure to check over the whole room carefully. See our Filling Cracks Project for help with this.

Mask up Your Skirting

Get some masking tape or decorators tape, and tape all the way around the skirting so that you dont splash any paint on it. You can also mask around window and door frames.

Light switches and plug sockets can be masked, or just cleaned off with a sponge once youve finished painting.

Sand Down any Lumps and Bumps in Walls and Ceilings

If there are any imperfections, lumps or bumps on the wall or ceiling, you will need to sand it down. If you dont sand the walls before you start, you will only enhance any imperfections and make it look worse.

Preparing Walls and Ceilings for Painting How to Get the Best Finish When Painting Walls and

If there are lots of rough areas, a mouse sander will make the job much easier and quicker for you.

Make sure you finish with a fine grade paper to create a smooth wall ready for painting. Brush down the wall well after sanding to remove any dust, and rub down with a damp cloth for an even better finish.

How do I Sand Down my Ceiling?

To sand ceilings, you can use a piece of sandpaper attached to a pad on a long handle, or get up close using a step-ladder.

Do I Need to Remove Wallpaper Before Painting?

If the walls are currently papered, unless its a plain, smooth paper in good condition, youll need to strip it off before you start. See our Wallpaper Stripping Project for help with this.

If you have any problems with mould, damp or condensation in the room you are painting, see our Damp and Mould Project for help.

Don’t fancy doing this project yourself? We work with Checkatrade to ensure that we recommend only reliable and trustworthy tradesmen.

Leave a Reply