Easy install Tin Ceiling Tiles (2×4), White only $13.95

Easy install Tin Ceiling Tiles (2x4), White only $13.95

Black, brass, bronze, copper, aged copper, nickel and white faux Tin Ceiling tiles (2×4) are easily installed without nailing plus save money. Save on solid colored styrene tin styled tiles for walls, backsplashes and ceilings. Above #209 solid colored brass. It is impossible to tell the difference from metal or styrene panels. Plus we offer 31 designs in metal Tin tiles, see separate web page. Also see our Acoustical page to cost effectively STOP NOISE thru walls, ceilings & floors!

Shown above. #309 Solid colored Bronze used in a truly one of a ki nd bar. Ad d th e luxurious look, and classic touch of a pub styl e d tin ceiling for a fraction of the cost.( Click to enlarge.)

#309 solid colored copper. Used in a three season porch. Also use in outdoor porches & carports as panels wont absorb moisture or rust.

#207 solid colored bronze. Both horizontal & vertical surfaces covered for better detail. 3/4 stained wood outside corner was used to cover the corners. Also use on backsplashes & walls.

Use in commercial interiors as well as residential. Thermoformed white #209 2×4 panels copper painted and installed in a T-grid system by refacing the old tiles. The 15/16″ T-grid is painted the same color as the panels. Thermoformed tiles are Class A fire resistant plus have some acoustical absorption (NRC .45) unlike metal tiles that dont. Cleanable so use in food prep areas .

Pre-Cut 23.5″ by 23.5″ tiles are available for refacing standard 5/8 ceiling tiles! Panels simply glue to existing tile and reinstall in a 15/16 T-Grid system for a fresh new look thats easy to install! Also are available are pre-cut 23.5″ x 47.5″ tiles. Plus both sizes are available mounted to Class A foam board ready to install into a new 15/16″ ceiling T-grid (NRC .45).

White #207 installed natural matte white without painting. Also used vertically in the soffit to complete our new look!

White #209 in a foyer.Easily glued-up with our Loctite quick-grab glue .

Black #209 installed in a powder room. Use in humid areas as panels will not absorb moisture or rust and are cleanable!

#320 nickel colored styrene. This contempory design adds to any small or large room.Simply cut panels with a knife or scissors.

Bronze #320. See our Acoustical page to STOP NOISE thru walls, ceilings and floors.

Wainscot is #T331 Maple Tambour paneling.See our Tambour page . Above is bronze #321.

Tambour is a high quality real wood paneling product with no visible seams between panels. Easily glued-up. Use on walls, ceilings, wainscot, bar fronts, backsplashes, columns & basement poles. See our Tambour page .

Acoustic Decoupler Underlayment stops noise transfer thru carpet, wood flooring. ceramic tile & vinyl flooring. See our Acoustical page.

Noise Control Barrier Stops Noise cost effectively thru walls, floors & ceilings. See our Acoustical page.

Black, brass, bronze, copper, aged copper, nickel and white faux Tin Ceiling tiles (2×4) are easily installed without nailing plus save money. Save on solid colored styrene tin styled tiles for walls, backsplashes and ceilings. Above #209 solid colored brass. It is impossible to tell the difference from metal or styrene panels. Plus we offer 31 designs in metal Tin tiles, see separate web page. Also see our Acoustical page to cost effectively STOP NOISE thru walls, ceilings & floors!

Shown above. #309 Solid colored Bronze used in a truly one of a ki nd bar. Ad d th e luxurious look, and classic touch of a pub styl e d tin ceiling for a fraction of the cost.( Click to enlarge.)

#309 solid colored copper. Used in a three season porch. Also use in outdoor porches & carports as panels wont absorb moisture or rust.

#207 solid colored bronze. Both horizontal & vertical surfaces covered for better detail. 3/4 stained wood outside corner was used to cover the corners. Also use on backsplashes & walls.

Use in commercial interiors as well as residential. Thermoformed white #209 2×4 panels copper painted and installed in a T-grid system by refacing the old tiles. The 15/16″ T-grid is painted the same color as the panels. Thermoformed tiles are Class A fire resistant plus have some acoustical absorption (NRC .45) unlike metal tiles that dont. Cleanable so use in food prep areas .

Pre-Cut 23.5″ by 23.5″ tiles are available for refacing standard 5/8 ceiling tiles! Panels simply glue to existing tile and reinstall in a 15/16 T-Grid system for a fresh new look thats easy to install! Also are available are pre-cut 23.5″ x 47.5″ tiles. Plus both sizes are available mounted to Class A foam board ready to install into a new 15/16″ ceiling T-grid (NRC .45).

White #207 installed natural matte white without painting. Also used vertically in the soffit to complete our new look!

White #209 in a foyer.Easily glued-up with our Loctite quick-grab glue .

Black #209 installed in a powder room. Use in humid areas as panels will not absorb moisture or rust and are cleanable!

#320 nickel colored styrene. This contempory design adds to any small or large room.Simply cut panels with a knife or scissors.

Bronze #320. See our Acoustical page to STOP NOISE thru walls, ceilings and floors.

Wainscot is #T331 Maple Tambour paneling.See our Tambour page . Above is bronze #321.

Tambour is a high quality real wood paneling product with no visible seams between panels. Easily glued-up. Use on walls, ceilings, wainscot, bar fronts, backsplashes, columns & basement poles. See our Tambour page .

Acoustic Decoupler Underlayment stops noise transfer thru carpet, wood flooring. ceramic tile & vinyl flooring. See our Acoustical page.

Noise Control Barrier Stops Noise cost effectively thru walls, floors & ceilings. See our Acoustical page.


Leave a Reply